Lufeng is the design and equipment supplier of complete non-ferrous metal electrolysis system. It has provided design and related equipment for many non-ferrous smelters at home and abroad.
The purpose of electrolytic refining is to obtain industrial metals with high purity and recover the associated rare and precious metals. The main equipment of the electrolysis system mainly includes: Starter plate unit, anode disc casting machine, electrolytic cell, conductive copper bar, rectifier, anode mud treatment system, electrolyte preparation system, etc.
Lufeng has a mature design team, which can design the electrolysis workshop according to the specific project requirements of customers. Build a modern smelter with energy conservation, good economic efficiency and environmental friendliness for customers.
The lead pump preheats the circulating lead in the lead storage tank, gradually increasing the molten lead level in the tank, allowing the production drum to be immersed in an appropriate amount of lead liquid. As the drum rotates, a layer of lead liquid is adhered to the surface of the cylinder, which solidifies into a thin layer of lead skin.
Firstly, the electric control circuit is used to start the disc conveyor motor. The disc supports the spindle mold and rotates. During the rotation process, signals are sent to the PLC through different proximity switches at different stages. The PLC sends instructions to pour out the lead water spindle mold and shape it. The disc rotates to the plate taking frame, and the proximity switch sends a signal to the PLC.
The lead pump preheats the circulating lead in the lead storage tank, gradually increasing the molten lead level in the tank, allowing the production drum to be immersed in an appropriate amount of lead liquid. As the drum rotates, a layer of lead liquid is adhered to the surface of the cylinder, which solidifies into a thin layer of lead skin.
Firstly, the electric control circuit is used to start the disc conveyor motor. The disc supports the spindle mold and rotates. During the rotation process, signals are sent to the PLC through different proximity switches at different stages. The PLC sends instructions to pour out the lead water spindle mold and shape it.
The lead pump preheats the circulating lead in the lead storage tank, gradually increasing the molten lead level in the tank, allowing the production drum to be immersed in an appropriate amount of lead liquid. As the drum rotates, a layer of lead liquid is adhered to the surface of the cylinder, which solidifies into a thin layer of lead skin.
Main use: This equipment is matched with a lead melting furnace, and the molten lead is pumped into a lead ingot quantitative pouring container through a lead pump. The lead water is then quantitatively poured into the mold, cooled by the mold, and turned into a standard lead resistance plate.