+86-17773276726
[email protected]
Sitemap | RSS | XML
English English
Electrolytic system
Home > PRODUCTS > Electrolytic system

Electrolytic system

Lufeng is the design and equipment supplier of complete non-ferrous metal electrolysis system. It has provided design and related equipment for many non-ferrous smelters at home and abroad.

The purpose of electrolytic refining is to obtain industrial metals with high purity and recover the associated rare and precious metals. The main equipment of the electrolysis system mainly includes: Starter plate unit, anode disc casting machine, electrolytic cell, conductive copper bar, rectifier, anode mud treatment system, electrolyte preparation system, etc.

Lufeng has a mature design team, which can design the electrolysis workshop according to the specific project requirements of customers. Build a modern smelter with energy conservation, good economic efficiency and environmental friendliness for customers.

View as  
 

  • we make copper electrolysis machine line copper wire recycling machinePrinciples of Copper ElectrolysisThrough electrolysis of an electrolyte solution, crude copper is used as the anode, pure copper is used as the cathode, and a solution containing copper ions is used as the electrolyte. Copper dissolves from the anode and precipitates at the cathode. Impurities in crude copper do not dissolve, and inactive impurities become anode mud and settle at the bottom of the electrolytic cell. Although active impurities dissolve at the anode, they cannot precipitate at the cathode. So high purity copper can be obtained through electrolytic cathode.The copper electrolytic refining process was first applied in industry in 1896, with a history of 140 years. During this period, although the basic principles remained unchanged, significant progress was made in terms of technical equipment level, production scale, copper quality, and energy consumption reduction.

    Read More Send Inquiry Read More

  • xingtan lufeng machinery company lead acid battery recycling machine anode plate casting machine Lead anode plate automatic lineFirstly, the electric control circuit is used to start the disc conveyor motor. The disc supports the spindle mold and rotates. During the rotation process, signals are sent to the PLC through different proximity switches at different stages. The PLC sends instructions to pour out the lead water spindle mold and shape it. The disc rotates to the plate taking frame, and the proximity switch sends a signal to the PLC. The PLC sends instructions to the plate catching hook to automatically pick up the ingot and then transmit it to the conveyor belt. This plate catching hook has three hooks, and during one cycle of the disc rotation, The lead ingots are automatically picked up and transported to the conveyor belt in time and sections, forming an automatic flow process. The completion of this process mainly relies on the proximity switch providing different signals and the PLC setting different commands.1. Main use: This equipment is matched with a lead melting furnace, and the molten lead is pumped into a lead ingot quantitative pouring container through a lead pump. The lead water is then quantitatively poured into the mold, cooled by the mold, and turned into a standard lead resistance plate. Then, it is transported to the plate conveyor through an automatic plate pulling and flat plate device.2. Product composition: lead quantitative pouring device, disc rack, ingot mold, automatic plate pulling mechanism, flat plate mechanism, conveying and arranging plate transportation mechanism, and electrical control system.

    Read More Send Inquiry Read More

  • The lead pump preheats the circulating lead in the lead storage tank, gradually increasing the molten lead level in the tank, allowing the production drum to be immersed in an appropriate amount of lead liquid. As the drum rotates, a layer of lead liquid is adhered to the surface of the cylinder, which solidifies into a thin layer of lead skin. During the drum rotation process.

    Read More Send Inquiry Read More

  • Firstly, the electric control circuit is used to start the disc conveyor motor. The disc supports the spindle mold and rotates. During the rotation process, signals are sent to the PLC through different proximity switches at different stages. The PLC sends instructions to pour out the lead water spindle mold and shape it. The disc rotates to the plate taking frame, and the proximity switch sends a signal to the PLC.

    Read More Send Inquiry Read More

  • LuFeng is mainly engaged in the development, manufacturing, installation and debugging of mining, smelting and construction machinery. Now the main productions are smelting equipment and complete set of equipment, such as: smelting furnace , automatic production line of lead /Aluminum /copper (zinc) ingot casting machine, anode plate casting machine, cathode production machine, crusher, slag casting machine, mixer, lead pump, lead pot and non-standard equipment.

    Read More Send Inquiry Read More

  • Residual electrode washing is a very important process in copper electrolysis process. Residual electrode washing is the process of cleaning the anode mud on the residue, cleaning the precious metal mixture on the residue before production, reducing the residual amount of anode mud on the residue, and bringing objective economic benefits to the enterprise. The residual electrode washing automation unit can quickly clean residual electrodes, efficiently and quickly, greatly improving the efficiency of copper electrolysis.

    Read More Send Inquiry Read More
Links：